| Table of Contents |
| Flash firmware: go to Meshtastic Web Flasher and select the RAK WisBlock 4631 option |
Pairing & Configuration
iOS Meshtastic AppDownload Link
Android Meshtastic App
Download Link
Web Client
client.meshtastic.org
Python CLI
Install Instructions HERE (If Python 64bit doesn't work, try 32bit.)
iPhone / iPad - Pairing & Configuration (Cont.)
|
Step 1: Open the Meshtastic App on your iOS device and power on the LowMesh Pocket-S. |
|
Step 2: Go to Bluetooth (menu inside Meshtastic app, not your phone's Bluetooth settings), and pair with the device (name will begin with LowMesh instead of generic Meshtastic node name shown in photos). DEFAULT PIN 123456 |
|
Steps 3-5: Tap Set LoRa Region, then select the region. |
|
|
|
Step 6-8: Then tap Save. LowMesh Pocket-S will automatically reboot and re-pair to your iOS device. |
|
|
Android Phone / Tablet - Pairing & Configuration (Cont.)
|
Step 1-2: Open the Meshtastic App on your Android device and power on your LowMesh Pocket-S . Then on your Android Device within the Meshtastic App tap the teal plus bubble in the bottom right corner. The node name begins with LowMesh. On your Android device simply tap on the Bluetooth device that matches. *An Android device a notification may appear, if so Tap "Pair & Connect". |
|
Step 3: Enter the Bluetooth pin default code 123456 when prompted. |
|
Step 4: Next select the region the device will be operated in. |
|
|
Enable BME280 Sensor
1. Go to Settings > Telemetry Config
2. Under Sensor Options, toggle the "enabled" button
Enable Buzzer
1. Go to Settings > Device
2. Under "Buzzer GPIO" select "Pin 21"
Mod for external antenna installation
Military and First Responder 
