Heltec Wireless Tracker V2 ESP32-S3 +GPS + LoRa Node Meshtastic MeshCore Compatible

€33,95

Pickup available at 3205 SW 40th Blvd Ste A

Usually ready in 1 hour

Wireless Tracker V2 powered by ESP32-S3FN8, integrates SX1262 and UC6580 to support WiFi, Bluetooth, LoRa, and GNSS. With a built-in PA, it delivers a transmit power of 28±1 dBm. This is US 900 MHz version.

The Wireless Tracker V2 is built around the ESP32-S3FN8 and integrates the SX1262 LoRa chip along with the UC6580 GNSS chip.

This new generation Wireless Tracker V2 incorporates a power amplifier, achieving a maximum transmission power of up to 28±1dBm. The LNA can be bypassed without affecting reception performance.

The Wireless Tracker V2 features LDS antennas for both GNSS and 2.4G, significantly reducing the device’s size.

It is widely used in fields such as personnel positioning, asset tracking, LoRaWAN, Meshtastic, and MeshCore.


Main Features

  • Supports Wi-Fi/Bluetooth, LoRa, and GNSS communication.
  • Integrates a power amplifier with a maximum output power of 28±1dBm, and the LNA can be bypassed.
  • Supports multi-system joint positioning including GPS, GLONASS, BDS (BeiDou), Galileo, NAVIC, and QZSS.
  • Integrated lithium battery management system (charge/discharge management, overcharge protection, battery power detection, automatic switching between USB and battery power).
  • USB-C interface with comprehensive voltage regulation, ESD protection, short circuit protection, and RF shielding.
  • Supports the Arduino development framework, providing LoRa/LoRaWAN examples.
  • Compatible with Meshtastic and MeshCore.


Specifications


Parameters Description
MCU ESP32-S3FN8 (Xtensa®32-bit lx7 dual core processor)
LoRa Chip SX1262
GNSS Chip UC6580
Frequency 902~928MHz
Max. TX Power 28±1dBm
Max. Receiving Sensitivity -134dBm
Wi-Fi 802.11 b/g/n, up to 150Mbps
Bluetooth LE Bluetooth 5,
Bluetooth mesh
Hardware Resource 7*ADC1 + 2*ADC2; 7*Touch;
3*UART;
2*I2C; 2*SPI; etc.
Interface Type-C USB;
2*1.25 lithium battery interface;
2*1.25 solar panel interface;
LoRa ANT(IPEX1.0);
GNSS ANT(IPEX1.0);
2*18*2.54 Header Pin
Battery 3.7V(3V-4.2V) lithium battery power supply and charging
Operating Temperature -20 ~ 70 ℃
Dimensions 52.00*25.40*10.26 mm


Layout

Pin Map

Dimension


Dev board return policy

Development boards are specialty items that generally cannot be resold on return, especially if the firmware has been flashed. Defective boards can be replaced or returned for refund within 30 days of purchase. Non-defective boards can be returned in the same time frame if in like-new condition with a 20 percent restocking fee applied. If the board has had altered firmware or became bricked due to a non-standard firmware flash, the board may not be eligible for return.

Sales tax is required in many states and will be added at checkout if applicable to your delivery state. Tax exempt forms can be sent to our support department.
Shipping & Returns

FREE Standard shipping on all orders shipped in the USA! 

Special offer- FREE shipping promotion on all USA orders of any value has been extended to October 1st

We are in Florida and ship to: USA, Australia, Austria, Canada, France, Germany, Israel, Netherlands, the United Kingdom, and other countries (see full list in cart).

Local pickup available in Gainesville, FL

Expedited shipping orders placed before 3PM EST weekdays will ship that day. Standard shipping orders ship within 1-2 business days.

Sales tax: shipments shipped to states in which we are registered to collect tax will have appropriate tax added at checkout. Tax exempt forms can be sent to our support staff who can activate exemption status. 

Lost packages and insurance

Hawaii & International Shipping:

While Hawaii is not international, packages from our Florida location with free standard shipping may take up to a month. We suggest purchasing expedited air shipping for Hawaii (note batteries cannot be shipped by Air). International shipping options are visible in cart by using the shipping estimator. Transit times posted are estimates. International packages are subject to customs holds and duty payment may be required by your government on delivery. The cost of duty is not reimbursable. International shipping charges are not refundable in the event of a return.

Returns

See item description for product specific return policies, and return policies vary by item.

Bulk/High Value Order Returns

Due to the labour required to package and ship bulk orders, as well as cost and stock issues involved in replenishing items, bulk orders of 5 pieces or more are not returnable unless the equipment is defective or mis-advertised, or a return period is pre-negotiated. For non-defective returns over $500, a restocking fee may be deducted from the refund to cover bank or card processing fees.

Backorder/Preorder

Items on back order or pre-order will ship as estimated on the item page. You can cancel an order any time up until shipment. Orders with expedited shipping will arrive in the advertised time after the order ships, not after the order is placed.

Cancellations

If you want to cancel an order, please email or call us at (352) 372-9902. If your item has not been shipped, we will cancel the order and provide a full refund.

GPSR Information