Rokland

ALFA Network IP65 Waterproof Outdoor Magnetic Base N Female for Helium Antenna or WiFi + 10 ft. LMR200 cable ARS-AS087

$39.97

Pickup available at 2251 NW 41st Street

Usually ready in 1 hour

The ALFA ARS-AS087 comes with a Type-N female to RP-SMA male antenna extender with a magnetic mount and ~10-foot length LMR®-200 cable. This means you can extend your N-male antenna with very limited loss.

This base is IP65 certified and safe to use outdoors and in the elements. We do recommend RokTape to seal all outdoor connection points. 


Use with Rokland 4 dBi Fiberglass Outdoor Antenna
Use with Rokland 
5.8 dBi N-Male Omni Outdoor Helium 915 MHz Antenna
Use with Rokland 8.5 dBi N-Male Omni Outdoor Helium 915 MHz Antenna
Use with Rokland 10 dBi Backcountry Rural N-Male Omni Outdoor 915 MHz Antenna
Use with ALFA AOA-915-5ACM 5 dBi Omni Indoor/Outdoor 915 MHz antenna

This is a great option for short-range indoor or OUTDOOR extension of a compatible antenna for your RAK V2, Bobcat 300, Nebra Indoor/Outdoor, SenseCAP M1, SyncroB.it, Helium Hotspot, Kerlink & LongAP miner. This is not compatible with the factory antenna for these miners, for a compatible base, see here. The base is magnetic so do not put the base right near a computer hard drive. 

Cheap entry-level magnet docking bases for antennas typically have cables without shielding. Our thick shielded CFD-200 cable limits gain loss to just 0.9 dB for 915 MHz (1.4 dB for 2.4 GHz WiFi), helping you preserve your antenna gain.

Frequency: 0~6GHz
Diameter: 3.4 inches
Maximum Input Power: 50 W
Impedance: 50 ohms
Cable Type: LMR-200
Connector A: N-Type Female Connector
Connector B: RP-SMA Male Connector
Operation Temperature: -40°C ~ +70°C
Cable Length: 3 meters (~9.5 feet)

Heavy Duty/Heavy Weight
Larger antennas will cause weaker magnet bases to fall over. Our heavy-duty magnet gives the total base a weight of 15 ounces, compared to just 3 ounces for an entry-level base.

Compatibility: This base has an N-female connector on the top and an RP-SMA male connector at the end of the 9.5-foot cable. RP-SMA is reverse polarity SMA, so the female port has a pin and the male has a hole, as the gender with RP goes by threading. This base is compatible with many popular N-male antennas, including all of the N-male antennas we carry: 

Use with Rokland 4 dBi Fiberglass Outdoor Antenna
Use with Rokland 
5.8 dBi N-Male Omni Outdoor Helium 915 MHz Antenna
Use with Rokland 8.5 dBi N-Male Omni Outdoor Helium 915 MHz Antenna
Use with Rokland 10 dBi Backcountry Rural N-Male Omni Outdoor 915 MHz Antenna
Use with ALFA AOA-915-5ACM 5 dBi Omni Indoor/Outdoor 915 MHz antenna


Warranty & Support:
Complimentary Telephone and Email/Live Chat Support (Click Here)

Sales tax is required in many states and will be added at checkout if applicable to your delivery state. Tax exempt forms can be sent to our support department.

Return Policy: Outdoor Magnet Bases may be returned for a refund if new within 30 days of delivery. Used Outdoor Magnet Bases cannot be returned except in case of defect. We only cover return shipping in case of a wrong item shipped. Returned orders with free shipping selected will incur a 15% recovery fee to help us recover some of the original shipping cost unless the item is defective or incorrect. Expedited shipping charges paid are non-refundable. For bulk purchases, see our bulk purchase return policy here.

Shipping & Returns
FREE Standard shipping on all items shipped in the USA! 
We are in Florida and ship to: USA, Australia, Austria, Canada, France, Germany, Israel, Netherlands, the United Kingdom, and other countries (see full list in cart).

Local pickup available in Gainesville, FL

Expedited shipping orders placed before 3PM EST weekdays will ship that day. Standard shipping orders ship within 1 business day.

Sales tax: shipments shipped to states in which we are registered to collect tax will have appropriate tax added at checkout. Tax exempt forms can be sent to our support staff who can activate exemption status. 

Lost packages and insurance

International Shipping:

Shipping options are visible in cart by using the shipping estimator. Transit times posted are estimates. International packages are subject to customs holds and duty payment may be required by your government on delivery. The cost of duty  is not reimbursable. Internatonal shipping charges are not refundable in the event of a return.

Returns

See item description for product specific return policies, and return policies vary by item.

Bulk/High Value Order Returns

Due to the labor required to package and ship bulk orders, as well as cost and stock issues involved in replenishing items, bulk orders of 5 pieces or more are not returnable unless the equipment is defective or mis-advertised, or a return period is prenegotiated. For non-defective returns over $500, a restocking fee may be deducted from the refund to cover bank or card processing fees.

Backorder/Preorder

Items on backorder or preorder will ship as estimated on the item page. You can cancel an order any time up until shipment. Orders with expedited shipping will arrive in the advertised time after the order ships, not after the order is placed.

Cancellations

If you want to cancel an order, please email or call us at (352) 372-9902. If your item has not been shipped, we will cancel the order and provide a full refund.

GPSR Information

No GPSR compliance data available for this product.

Customer Reviews

Based on 4 reviews
25%
(1)
25%
(1)
50%
(2)
0%
(0)
0%
(0)
J
Judith Usher Ackermann
best product

Best antenna I ever tested.

G
Greg Eigsti
Magnet not very strong

Works as advertised however the magnet is not very strong compared to other magnetic bases that I have used. That said it does not appear to have moved.

T
Tyler Ewin
Has a design flaw...

Overall it is a solid product, but there is one issue that can easily be fixed. The nut on top is too thick and doesn't allow you to properly tighten your antenna. I've tried this with both the 4dbi and 8.5dbi from Rockland and neither will tighten properly without removing the nut. With the nut removed it works just fine for testing, but a thinner nut or longer threads would solve this issue.

S
Scott A Robertson
5dbi

Works perfect for quick mini setup