***Does NOT include T-Deck LoRa radio, antenna, or battery.*** Some assembly required. Choose with or without GPS Grove Connector mod for Rokland T-Deck GPS kit before adding to cart. We are proud to present Rokland's very first Meshtastic LILYGO® T-Deck case. The case is custom 3D printed and designed to...

***Does NOT include LILYGO T-Echo LoRa radio*** Some assembly required. The Rokland 3000mAh Battery Extension Pack allows for upgrade over the LILYGO T-Echo's standard 850mAh battery. These cases were designed, made, and licensed for Rokland by Sync_Kira. Your purchase supports him and small businesses! Compatible with the following models: LILYGO...

T-Display-S3 AMOLED is a display screen module with a 1.91" diagonal screen, based on the prior S3 module, LILYGO has upgraded the screen, resolution and antenna from LCD to AMOLED and the antenna to 3D antenna.Using SPI interface, it is compatible with any microcontroller with SPI capability. The module is equipped with...

T-Deck is a pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display, a mini keyboard, and an ESP32 dual-core processor. It is not a smartphone, though it looks like one- but you can use your programming knowledge to turn it into a standalone messaging device, or use with coding software for programming.Keyboard: US...

Introducing our exclusive easy-connect GPS solution for the LILYGO T-Deck Meshtastic device. This kit is ready to attach to the Grove connector on the LILYGO T-Deck and requires NO soldering.Just enable the GPS within Meshtastic settings, and you are good to go! Key Features Datasheets: UBLOX UBX-G6010-ST UBLOX G7020-KT AT6558...

The Battery Connector Cable is suitable to connect your LiPo battery to the battery connector of your JST 1.25 connector on a base board. The polarity is for LILYGO and Heltec products. See picture and always check positive/negative on your board before hooking up to ensure a match. Please make sure to...

The LILYGO® T-Camera S3 Fisheye OV2640 HD Camera is a development board designed for IoT applications. Main image shows front and back of single unit, sale is for single unit.Equipped with the ESP32-S3FN1 6R8 Dual-core microprocessor and OV2640 camera module, this board is perfect for building projects that require high-performance processing...

***Does NOT include LoRa radio, antenna, OLED screen, or battery.*** Some assembly required. We are proud to present Rokland's very first Meshtastic LILYGO® TTGO LoRa32 V2.1_1.6 case. The case is custom 3D printed and designed to house a LILYGO® TTGO LoRa32 V2.1_1.6. These cases were designed, made, and licensed for Rokland...

T-BeamSUPREME (M) development board produced by LILYGO and Meshtastic. The main difference between T-BeamSUPREME (M) and T-BeamSUPREME (S) is the different firmware of the products. The board has a SMA-female connector (compatible with SMA-male antennas). T-BeamSUPREME (M)=T-BeamSUPREME MeshtasticT-BeamSUPREME (S)=T-BeamSUPREME SoftRFThe difference between L76K and u-blox versions Specifications MCU ESP32-S3FN8 Dual-core LX7...

The T-Echo is the latest device to be release by LILYGO® supporting a low power consumption microcontroller. This is the white color, without BME280 firmware file: firmware-t-echo-1.x.x.uf2 TTGO's GitHub page for the T-EchoLILYGO SKU H505 Features​ nRF52840 - Bluetooth BLE 5.0, NFC and very low power consumption SX1262 - LoRa transceiver 1.54" eInk...

LILYGO® T-Keyboard ESP32-C3 Wireless Keyboard Mini Bluetooth Keypad for IOS/Android/Windows ipad *The item is not yet compatible with the LILYGO T-Echo, but that is a project that will be completed. We will post any update here.Keyboard: US QWERTY layout, may have additional symbols or characters on keys in other language in...

The T-Echo is the latest device to be release by LILYGO® supporting a low power consumption microcontroller. This is the white color, WITH BME280 Humidity and Pressure Sensor. Picture shows both sides of device, only 1 unit included in sale. firmware file: firmware-t-echo-1.x.x.uf2 TTGO's GitHub page for the T-EchoLILYGO SKU H511 Features​...

Note: Q407 replaces part Q349 in September 2023. It is T-Beam v1.2 instead of v1.1 (Q349 SKU). OLED is soldered to T-BEAM (pictures may show multiple sides of this product, only 1 unit included in sale) Meshtastic pre-installed ESP32 - Wifi & Bluetooth SX1276 - LoRa Transceiver Frequency: 915 MHz NEO-6M - GPS receiver...

In case of sellout, RAK1921 is a similar display that can be used interchangeably.Introducing the LILYGO® TTGO 0.96 Inch OLED White Color Text Display Module. This compact module features a high-quality 128x64 OLED display with I2C serial interface, perfect for adding text, graphics, and simple animations to your T-BEAM or T-SIM projects....

LILYGO® TTGO LoRa32 V2.1_1.6 VersionAt the TTGO LoRa V2.1 ,we added the SMA and IP5306 to the board, which allows it to do more things.In terms of the power switch, LILYGO has changed the switching interaction mode.The added SMA antenna can enhance signal transmission.(Notice: does not include battery and SD...

***Does NOT include LoRa radio, antenna, OLED screen, or battery.*** Some assembly required.This fits our 1100 mAh battery, but NOT the 2000 or 3000 models. We are proud to present Rokland's very first Meshtastic LILYGO® TTGO LoRa32 V2.1_1.6 case. The case is custom 3D printed and designed to house a LILYGO®...

H441-08 SIM7600G-H ESP32 SIM Series Nano Card Composable - Wireless Development Board If you need technical support please check the github link below for more details. T-PCIE Since AXP192 is out of production, it is now replaced by AXP2101 and the old and new versions will be delivered randomly. The T-PCIE...

T-TWR Plus is the ultimate development board for ambitious tech-enthusiasts. With integrated Wi-Fi and Bluetooth, and a SA868 Wireless Transceiver, this board can achieve Walkie-Talkie functionality. It also includes an OLED Display and GPS for precise location tracking. Unleash the potential of T-TWR Plus. ***This product does not include the battery.***Check...

T-TWR Plus is the ultimate development board for ambitious tech-enthusiasts. With integrated Wi-Fi and Bluetooth, and a SA868 Wireless Transceiver, this board can achieve Walkie-Talkie functionality. It also includes an OLED Display and GPS for precise location tracking. Unleash the potential of T-TWR Plus. ***This product does not include the battery.***Check...

LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display Development Board WIFI Bluetooth 5.0 Wireless Module 170*320 Resolution..T-Display-S3 Touch is a development board whose main control chip is ESP32-S3. It is equipped with a 1.9-inch LCD color touch screen and two programmable buttons. Communication using the I8080 interface Retains the same layout design...

ESP32 S3 touch screen 2.41 inch MCU ESP32-S3R8 Dual-core LX7 microprocessor Wireless Connectivity 2.4 GHz Wi-Fi & Bluetooth 5 (LE) Development Arduino, PlatformIO-IDE, Micropython Flash 16MB PSRAM 8MB Language C, C++, Lua Onboard functions Boot Button + Reset + Micro SD 2.41-inch SPI RGB AMOLED Active Area 36.2*48.96mm Brightness 800cd/m Resolution 450(W) x RGB...

Support 802.11 b/g/n Wi-Fi and Bluetooth 5 Specifications MCU ESP32-S3-WROOM-1 dual-core XTensa LX7 MCU Programming platform Arduino-IDE, VS Code Onboard functions Reset Button + Boot Button Support T-PCIE SIM function Module, Grove Seat Full-duplex high-speed RS485 module Module Name RSM485MT5V Port TTL/RS485 Isolation voltage 3000V Isolation output 5V/50mA 0.25W Communication rate 1200~128000bps...

T-Watch S3 is an open-source smart watch for developers who want to experiment with LoRa and ESP32 S3 technology in wearable devices. It is highly customizable and usable in a variety of applications. US 915 MHz Specs MCU ESP32-S3 FLASH 16MB PS RAM 8MB Platform Arduino-IDE, ESP-IDF, VS Code, Micropython Wireless...

***WARNING BATTERIES CAN ONLY BE SHIPPED VIA GROUND***batteries also ship with 30% charge or less per HAZMAT restrictions. Capacity: Rated: 3300 mAhTypical: 3450 mAh(see below for definitions) Specifications: Included- 2 batteries (2 pack as shown in picture) Manufacturer: Sanyo (or Panasonic selection available) Model: NCR18650GA Size: 18650 Style: Flat Top Protected:...